fbpx
spk-logo-tm-2023
0%
1-888-310-4540 (main) / 1-888-707-6150 (support) info@spkaa.com
Select Page

Streamlining Project Management by Linking to Existing Codebeamer Requirements

windchill features best plm software
Written by Carlos Almeida
Published on August 10, 2024
Categories: Codebeamer | PTC | Video

Introduction

Hello, this is Carlos Almeida with SPK and Associates. I was asked regarding CodeBeamer how to trace existing requirements together when we use what you’ve already made. So let’s look at a couple of trackers here.

Requirement Trackers

I have a Customer Requirement Specifications tracker, and it has a System Requirement Specifications tracker. I want to trace a System Requirement Specification to a Customer Requirement Specification. I’ll open that up. I’ll select one of my Customer Requirements, and if I were to click here, you’d see that it would create a brand new one, which is not what I want. If I look at a specific tracker in the Properties tab here, you’ll see there’s no references yet. So let’s create one.

Creating a Tracker

The way you do that is you take advantage of a library. This is this little box with a check inside. When you initially click on that, this will be empty, and so what you want to do is click on the gear and then select which projects you want to have inside. You can add at the project level, like I did here for Basic Training, or you can go in and have it at the tracker level.

So let me bring back my Properties tab again. There’s no reference here. Go in and open this up. So I’d like to trace this existing specification over to this Customer Requirement. So I’m going to grab it, and you’ll see how this hovering it over allows me to create an association or reference. So I’m going to make this a reference.

So you’ll see that the reference was created. Let’s double-check that by going back to the Properties. There it is. Now, if I want to remove it, you have to remove going upstream. So you click on the thing you just created, and you’ll see Customer Requirement is the thing that you were traced to. You can select into this box and then remove it. There you go. Thank you very much.

Latest White Papers

An Engineer’s Guide to CAD and the Renaissance of Product Design

An Engineer’s Guide to CAD and the Renaissance of Product Design

Modern developers are either upgrading their technology or falling behind. Discover how new CAD technologies and other product design tools are altering the engineering space.What You Will Learn Discover how technologies like Creo and Creo+ from PTC are helping...

Related Resources

An Engineer’s Guide to CAD and the Renaissance of Product Design

An Engineer’s Guide to CAD and the Renaissance of Product Design

Modern developers are either upgrading their technology or falling behind. Discover how new CAD technologies and other product design tools are altering the engineering space.What You Will Learn Discover how technologies like Creo and Creo+ from PTC are helping...

Optimizing Design with PTC Creo and Windchill Integration

Optimizing Design with PTC Creo and Windchill Integration

Meeting the highest levels of product quality requires leading engineering and manufacturing teams to utilize integrated solutions. Bringing together advanced CAD and Product Lifecycle Management (PLM) capabilities can lead to lower costs and increased innovation....

Optimizing CAD for Aerospace Lightweighting and Fuel Efficiency

Optimizing CAD for Aerospace Lightweighting and Fuel Efficiency

In the aerospace industry, every pound counts. As environmental regulations tighten and fuel costs remain a top concern, manufacturers are constantly seeking ways to improve aircraft performance. Many are implementing lightweighting and enhancing fuel efficiency to...